Apatite-staffelite ore flotation efficiency improvement using two-stage slurry thickening

DOI: 10.47765/0869-5997-2021-10032

Abstract

The studies were performed suggesting that the cause of P2O5 losses during apatite-staffelite ores (ASO) treatment are due to non-selective flocculation of fine classes during flotation. When using strong flocculants, special preparation of condensed slurries is necessary, ensuring their deflocculation before the flotation process. A scheme and mode of preparation of fine classes for the flotation process have been developed, including thickening of the classification overflows using strong anionic flocculants and deflocculation of the thickened product before the flotation process with reagents-dispersants
used in the basic flotation mode. A mode of preparation of slimes of ASO ores for flotation is proposed, including thickening of the discharge of the classification operation using the anionic flocculant “Praestol-2540”, conditioning of the condensed product with additions of liquid glass and caustic soda in a ratio of 1 : 1, dilution and re-thickening of deflocculated slimes, consolidation and flotation thickened sludge and sand. The big laboratory tests have shown that the application of the developed regime provides a total increase in the extraction of P2O5 from ore from 70,1 to 71,5 % with an increase
in the P2O5 content in apatite concentrate from 37,1 to 37,8 %, which makes the developed technology promising for processing refractory ASO at Kovdorsky GOK.